Difference between revisions of "General/OOD"

From HPC
Jump to: navigation , search
m
Line 1: Line 1:
 
== Introduction ==
 
== Introduction ==
Viper Open OnDemand is a web portal that provides a single access point to a full range of ways to make use of Viper. Currently, Viper Open OnDemand is only available on the University network, so you must be on campus or connected via VPN. In the future, it is anticipated that it will be made accessible from off campus network with Multi-Factor Authentication (MFA).
+
Viper OnDemand is a web portal that provides a single access point to a full range of ways to make use of Viper. Viper OnDemand provides access to your HPC file storage, allows you to prepare, submit and monitor batch jobs, and also allows you to run a range of interactive graphical applications directly on Viper HPC hardware.
  
'''Please note:''' Viper Open OnDemand is currently in pilot, please raise any issues experienced via the "Contact Support" link under Help on the Viper Open OnDemand page
+
=== Capabilities ===
 
+
Viper OnDemand provides the following capabilities via the web browser:
== Capabilities ==
 
Viper Open OnDemand provides the following capabilities via the web browser:
 
 
* File and data management via a file explorer app
 
* File and data management via a file explorer app
 
* Full shell access, much like an SSH connection you can have full terminal access
 
* Full shell access, much like an SSH connection you can have full terminal access
Line 13: Line 11:
 
* Remote desktop access, providing full-featured desktop sessions
 
* Remote desktop access, providing full-featured desktop sessions
  
== Connecting to Viper Open OnDemand ==
+
=== Requirements ===
#'''Incognito mode''' - it is recommended to connect to Viper Open OnDemand from a private or incognito browser window. This is due to some caching issues making your browser think you are logged in when you are not.
+
You must have a Viper account before attempting to log in to Viper OnDemand. Currently, Viper OnDemand is only available on the University network, so you must be on campus or connected via VPN. In the future, it is anticipated that it will be made accessible from off campus network with Multi-Factor Authentication (MFA). No additional tools or applications are required, only a standard web browser.
 +
 
 +
== Using Viper OnDemand ==
 +
 
 +
=== Connecting to Viper OnDemand ===
 +
#'''Incognito mode''' - it is recommended to connect to Viper OnDemand from a private or incognito browser window. This is due to some caching issues making your browser think you are logged in when you are not.
 
#https://viperood.hpc.hull.ac.uk
 
#https://viperood.hpc.hull.ac.uk
<!--* Logging in to Viper Open OnDemand is via Microsoft 365 MFA page (though MFA is not currently configured). Enter your email address, click Next,-->
+
<!--* Logging in to Viper OnDemand is via Microsoft 365 MFA page (though MFA is not currently configured). Enter your email address, click Next,-->
 
#Log in using your university credentials - note unlike logging into Viper via SSH, in this situation you need to log in with your University email address.
 
#Log in using your university credentials - note unlike logging into Viper via SSH, in this situation you need to log in with your University email address.
 
[[File:Newsso.jpg]]
 
[[File:Newsso.jpg]]
  
== Menu options ==
+
 
* '''Apps''' - All features available.
+
=== Menu options ===
* '''Files''' - file explorer providing access to your Viper home directory.  
+
Once logged in you will be directed to the portal front page. Across the top of the page is the main menu which contains the following links:
 +
[[File: Viperondemand.png]]
 +
* '''Viper OnDemand''' - Shortcut to the main page of the web portal.
 +
* '''Apps''' - Shows all available applications.
 +
* '''Files''' - File explorer providing access to your Viper home directory.  
 
* '''Jobs''' - View active jobs and create batch jobs.
 
* '''Jobs''' - View active jobs and create batch jobs.
* '''Clusters''' - Command Line Access to Viper.
+
* '''Clusters''' - Provides command line access to Viper along with a link to information about resource availability on Viper
* '''Interactive Apps''' -  Graphical Interfaced applications on Viper.
+
* '''Interactive Apps''' -  List of interactive apps available through the web portal
* '''Job Submissions''' - Create an environment for Jupyter Notebook.
+
* '''My Interactive Sessions''' - View your currently running OOD jobs.
* '''My Interactive Sessions''' - View your previously run OOD jobs.
 
 
* '''Help''' - Contact support or view our documentation
 
* '''Help''' - Contact support or view our documentation
[[File: Viperondemand.png]]
 
===Apps===
 
*Access your files
 
*View active jobs
 
*Access all [[#Apps Available | interactive apps]]
 
*Access the command line
 
*Submit batch jobs
 
*Use the Jupyter Environment Creator
 
  
===Files===
 
Through this explorer, you can upload and download files, copy and move files within your Viper home directory or create new files or folders. You can also open a terminal in a chosen folder within your browser window.
 
  
'''Note''': the files explorer in Viper OnDemand may not be appropriate for very large data transfers (i.e. 10GB+) in which case a solution like [[http://hpc.mediawiki.hull.ac.uk/Training/Transferring_Data#Linux FileZilla]] is recommended.
+
== Interactive Apps ==
 +
====Launch====
 +
When launching interactive apps, you will see a form where you can set things like the resource to be used, how much resource (CPU, memory or exclusive access) or how long the job should run for. Some apps let you can pick a version of the application you would like to launch. Please always pick exclusive for Matlab and R Studio.
 +
[[ File:LaunchOOD.png ]]
 +
 
 +
====Connect====
 +
After clicking launch, your job will join the queue, before starting to run. Once running you can adjust the image quality of the connected session by adjusting the sliders for Compression level (lower value for better quality) and Image Quality (higher value for better quality) before launching to connect.
 +
[[File: Quality.png]]
  
===Jobs===
+
== Batch Jobs ==
====Active jobs====
+
=== Compose Job ===
View your and other users' jobs.
+
You can submit a [[Quickstart/Batch Jobs| batch job]] by using the Job Composer. There are a range of templates available for common apps, or jobs can created from previous jobs.
====Compose Job====
 
You can submit a [[Quickstart/Batch Jobs| batch job]] by using the Job Composer.
 
 
#Create a new job from the specified path
 
#Create a new job from the specified path
 
#Enter the path to the directory your submission script is in
 
#Enter the path to the directory your submission script is in
Line 57: Line 58:
 
Under the job options, you can change the job title, select a submission script, and add an [[FurtherTopics/Advanced Batch Jobs#Array batch job| array]] specification.
 
Under the job options, you can change the job title, select a submission script, and add an [[FurtherTopics/Advanced Batch Jobs#Array batch job| array]] specification.
  
===Clusters===
+
== Troubleshooting ==
Access to Viper via the command line. For guidance on using the command line please visit our [[Main Page#Quickstart| Quickstart]].
+
[[File: OOD-BadResponse.png]]
 
+
If you get a 'Bad Response' error, this normally indicates your connection has expired or the network connection you are using to connect to Viper OnDemand has changed. In this situation, please close your browser window (not just the tab) and try reconnecting. Depending on the particular tasks being run, most OnDemand apps should let you reconnect and resume working.
===Interactive Apps===
 
====Launch====
 
Before launching you need to give your job a name and select how long it is going to take. You can pick a version, how many cores, and a queue for the application you would like to launch. Please always pick exclusive for Matlab and R Studio.
 
[[ File:LaunchOOD.png ]]
 
 
 
====Connect====
 
You can adjust the image quality of the connected session by adjusting the sliders for Compression level (lower value for better quality) and Image Quality (higher value for better quality).
 
[[File: Quality.png]]
 
====Apps Available====
 
*Fiji is an image processing package—a "batteries-included" distribution of ImageJ, bundling a lot of plugins which facilitate scientific image analysis.
 
*Graphical Interactive Session. For guidance on using the command line please visit our [[Main Page#Quickstart| Quickstart]].
 
*[[OOD/Jupyter Notebook| Jupyter Notebook]]
 
*Matlab is a numerical computing environment and programming language developed by MathWorks, MATLAB allows matrix manipulations, plotting of functions and data, and implementation of algorithms. A range of toolboxes is available to extend functionality.
 
*[[OOD/R Studio|R Studio]] R is an open-source programming language and software environment for statistical computing & graphics.
 
*Stata is a commercial statistical package, which provides a complete solution for data analysis, data management, and graphics.
 
*[[OOD/Openbox| Openbox]]
 
 
 
===My Interactive Sessions===
 
View your interactive sessions from Viper OnDemand.
 
<!--
 
== Interactive Apps ==
 
=== Launch ===
 
=== Connect ===
 
You can adjust the image quality of the connected session by adjusting the sliders for Compression level (lower value for better quality) and Image Quality (higher value for better quality)
 
-->
 

Revision as of 08:48, 18 October 2024

Introduction

Viper OnDemand is a web portal that provides a single access point to a full range of ways to make use of Viper. Viper OnDemand provides access to your HPC file storage, allows you to prepare, submit and monitor batch jobs, and also allows you to run a range of interactive graphical applications directly on Viper HPC hardware.

Capabilities

Viper OnDemand provides the following capabilities via the web browser:

  • File and data management via a file explorer app
  • Full shell access, much like an SSH connection you can have full terminal access
  • Job management, including job creation and submission, monitoring and cancellation
  • Run web front-end applications such as Jupyter Notebooks and RStudio
  • Graphical user interface sessions for applications such as Matlab and Stata
  • Remote desktop access, providing full-featured desktop sessions

Requirements

You must have a Viper account before attempting to log in to Viper OnDemand. Currently, Viper OnDemand is only available on the University network, so you must be on campus or connected via VPN. In the future, it is anticipated that it will be made accessible from off campus network with Multi-Factor Authentication (MFA). No additional tools or applications are required, only a standard web browser.

Using Viper OnDemand

Connecting to Viper OnDemand

  1. Incognito mode - it is recommended to connect to Viper OnDemand from a private or incognito browser window. This is due to some caching issues making your browser think you are logged in when you are not.
  2. https://viperood.hpc.hull.ac.uk
  3. Log in using your university credentials - note unlike logging into Viper via SSH, in this situation you need to log in with your University email address.

Newsso.jpg


Menu options

Once logged in you will be directed to the portal front page. Across the top of the page is the main menu which contains the following links: Viperondemand.png

  • Viper OnDemand - Shortcut to the main page of the web portal.
  • Apps - Shows all available applications.
  • Files - File explorer providing access to your Viper home directory.
  • Jobs - View active jobs and create batch jobs.
  • Clusters - Provides command line access to Viper along with a link to information about resource availability on Viper
  • Interactive Apps - List of interactive apps available through the web portal
  • My Interactive Sessions - View your currently running OOD jobs.
  • Help - Contact support or view our documentation


Interactive Apps

Launch

When launching interactive apps, you will see a form where you can set things like the resource to be used, how much resource (CPU, memory or exclusive access) or how long the job should run for. Some apps let you can pick a version of the application you would like to launch. Please always pick exclusive for Matlab and R Studio. LaunchOOD.png

Connect

After clicking launch, your job will join the queue, before starting to run. Once running you can adjust the image quality of the connected session by adjusting the sliders for Compression level (lower value for better quality) and Image Quality (higher value for better quality) before launching to connect. Quality.png

Batch Jobs

Compose Job

You can submit a batch job by using the Job Composer. There are a range of templates available for common apps, or jobs can created from previous jobs.

  1. Create a new job from the specified path
  2. Enter the path to the directory your submission script is in
  3. Give the job a name
  4. Enter the name of the submission script - you can change this later under job options
  5. Click Save
  6. Select the job and click submit

Jobcomposer.jpg Under the job options, you can change the job title, select a submission script, and add an array specification.

Troubleshooting

OOD-BadResponse.png If you get a 'Bad Response' error, this normally indicates your connection has expired or the network connection you are using to connect to Viper OnDemand has changed. In this situation, please close your browser window (not just the tab) and try reconnecting. Depending on the particular tasks being run, most OnDemand apps should let you reconnect and resume working.