Revision as of 11:44, 28 February 2017

Introduction

You'll need to make a secure remote connection from your local computer to Viper. To use Viper off campus a VPN is required.

Connecting to Viper from a Windows PC

Connecting to Viper from a Windows PC can be achieved by a number of different applications. One listed here is 'MobaXterm'

Download and install MobaXterm from the website, ensuring you comply with the license agreement stated.

1. Launch MobaXterm

2. Click 'Session'

3. Select the 'SSH' type connection

4. Enter the Remote host: viper.hull.ac.uk

5. Enter your Username (University User ID)

6. Click OK

7. A terminal window will appear, enter your password followed by enter, this will not be echoed to the screen

Connecting to Viper from an Apple Mac

1. Go to Applications -> Utilities and open Terminal

2. Type 'ssh -x <yourusername>@viper.hull.ac.uk

3. The first time you connect to Viper, a message asks if you want to continue connecting. This message appears because Viper has an RSA key that is not stored in your system registry/keychain, the identity of which cannot be verified. Type 'yes' and press enter.

4. Enter your password followed by enter this will not be echoed to the screen.

Connecting to Viper from a Linux Computer

1. Open a Terminal application

2. Type ssh -x <yourusername>@viper.hull.ac.uk

3. The first time you connect to Viper, a message asks if you want to continue connecting. This message appears because Viper has an RSA key that is not stored in your system registry/keychain, the identity of which cannot be verified. Type 'yes' and press enter.

4. Enter your password followed by enter, this will not be echoed to the screen