FurtherTopics/Additional Information On Viper

What is Viper

Viper is the University of Hulls High-Performance Computer (HPC).

Our supercomputer or more accurately named High-Performance Computer (shortened to HPC) is made up of about 200 separate computers which are linked together by a very high-speed network. The purpose of the network is to allow them to exchange data between them and give the appearance they are acting as one large computer. The operating system is Linux which runs on the whole of Viper. This is the system used by the majority of research systems, including all of the top 500 supercomputers in the world.

Viper Infrastructure

Infrastructure
	Compute Nodes These make up most of the computing nodes and perform most of the standard computing processes within the HPC. Each node has 128GByte of RAM.
	High Memory Nodes These are very similar to the compute nodes but they have much more memory, ours have a 1 Tera Byte of RAM each which makes them ideal for research involving large memory models like engineering and DNA analysis in biology.
	Accelerator Nodes Also known as GPU nodes. We have 4 GPU nodes, each identical to compute nodes with the addition of an Nvidia Ampere A40 GPU per node. These are almost similar to high-end graphics cards found in gaming rigs. The usefulness of these cards is that they have thousands of very small processing cores in them and this makes them very useful for executing small amounts of code but in a massively parallel way. This is why these cards are used for the new areas of machine learning and deep learning also.
	Visualisation Nodes These are used for connecting from remote computers such as desktops and allow the rendered outputs from data to be viewed on a local computer. There are two visualisations nodes with 2x Nvidia GTX 980TI.
	High Speed Network All these compute nodes are connected by a very fast Intel Omni-path network to allow the compute nodes to act together. This runs at 100Gbit/s.
	Storage Nodes These are servers in their own right which allow access to the actual storage arrays (hard disks), Viper accesses it’s disk storage via these nodes.
	Storage Array These are the actual disks held in a chassis and make up the whole file storage for Viper. Viper has a total file space of 0.5 Petabyte or 500 Terabyte.
	Controller Node The controller nodes are responsible for the management of all the compute nodes. Managing the loading of jobs, their termination and completion via the job scheduler, for Viper this is SLURM.
	Login NodesThese are the nodes which allow the user to log in to the cluster, this area is then used by the user to prepare jobs for the cluster. Although this is a server in its own right it is not used for computing work.

How can viper be used?

• In Parallel (Single Node): where a job can run on a single node with 28 cores.

• In Parallel(Multiple Nodes): where a job needs more than 28 cores.

• Using acHigh Memory node: where a job needs a large amount of memory (currently these nodes have 1TB).

• Using GPU node(s): where a job can use fast GPU-accelerated calculations (for example high end graphics manipulation)

• The Visualisation nodes can be used for interactive visualisation and viewing 3D models.